Inheco Teleshake 95 AC加熱振蕩器

高性能緊湊型加熱器-搖動器,可安全固定可變板

在與所有主要甲板制造商集成的緊湊型設備中加熱和搖動重量高達500克的樣品。
組合式加熱器-振蕩器為您的樣品制備提供了效率、精度和成本效益。它們對于分子生物學、生物化學和臨床化學中的生命科學研究應用至關重要,包括下一代測序(NGS)。當混合少量樣品時,搖動比攪拌更可取,因為不需要額外的攪拌棒,所以沒有額外的污染風險,并且加熱搖動器可以通過減少反應過程時間和操作員工作量來減少工作流程中的瓶頸。

一致性和準確性
Teleshake 95 AC允許您搖動各種各樣的盤子。由于自動夾緊,它可以處理高達500 g的負載。Teleshake 95 AC可在高于環境溫度5 K至125 C的溫度范圍內工作,并提供出色的性能

  • 37°C時的精度為±0.3°C
  • 37°C時的均勻度為±0.2°C

它可用于以200 rpm至3000 rpm的轉速在軌道上搖動樣品,從低速開始以防止溢出。

適合的
使用您首選的一次性Teleshake 95 AC,包括微孔板、PCR板、條帶和試管,以及一些薄型容器和聚丙烯板。主動夾緊(自動化實驗室器具夾緊),針對不同的實驗室器具使用定制的夾緊桿,讓您無需調整即可使用不同的模板。這也使您能夠搖動帶有夾緊蓋的板,并允許刺穿密封箔,同時保持板牢牢夾緊。我們提供超過200個適配器內部制造,以確保與一次性物品的幾何形狀完美匹配,或者可以定制適配器來滿足您的需求。

易于集成
Teleshake 95 AC僅占用甲板上的一個ANSI/SLAS板位置,比標準微孔板占用的空間多一點,高度僅為55毫米,具有零定位功能,便于機器人舒適地抓取。獨立的甲板外控制器進一步減少甲板空間,同時降低噪音和溫度。選擇Inheco Multi TEC控制單元進行控制最多六個并行設備當你在甲板上使用幾個Inheco產品時。一個API是可用的,Teleshake 95 AC與所有主要的甲板制造商集成,實現即時即插即用。

Teleshake 95 AC
Part numberp/n 7100150
Height (bottom to contact surface)47.3 mm [1.862 in]
Height with standard fixation pins53.7 mm [2.144 in
Length x width144 mm x 101 mm [5.669 x 3976 in]
Temperature rangeUp to +125 °C [up tp +257 °F]
Maximum temperature difference in cooling mode
?T (=Tambient– Ttarget)
NoiseMax. 42 dB(A)
Protection categoryIP 20
Weight including cables2.2 kg [4.65 lbs]
Technical information regarding shaking for all devices
Maximum load1.0 kg
Shaker frequency weight reduces the max. speed200 to 3000 rpm
Shaking amplitude2 mm [0.07874 in]
Shaking patternOrbital

The use of RPM smaller 300 with the Thermoshake AC is possible. However, the shaking performance cannot be guaranteed. In case the shaking is not steady you will receive a warning “error 35 slot x (x = slot ID). This error can be ignored if no other error or warning are set at the same time. It is not Inheco′s responsibility if there is any method failure due to this low RPM.
Environmental conditions
Tolerable relative humidity:
Operation10-80% RH?*3?at +20 °C up to +30 °C [+68 °F to +86 °F]
Transportation and storage10-80% RH?*3?at +20 °C up to +30 °C [+68 °F to +86 °F]
Temperature:
Operation+15 °C to +32 °C [+59 °F to 90 °F]
Transportation and storage-10 °C to +60 °C [+14 °F to 140 °F]?*3

*3)?Condensate can prevent the Shaking devices from operating properly and can damage the Thermoshake AC. Condensate should be eliminated on a daily basis or more often, for example by heating cycles in between cooling cycles.

Related posts