Steel tank / vacuum max. 1.7 l 鋼罐/真空最大1.7升
Characteristics
特點
Material:
材質：
steel
鋼
Product application:
產品應用：
vacuum
真空
Capacity:
容量：
Min.: 0 m3 (0 ft3)
分鐘：0米（0英尺3）3
Max.: 1.7 m3 (60.03 ft3)
最大：1.7米（60.03英尺3）3
Description
描述
ANVER’s vacuum reservoir may be used as an inline or single ported auxiliary tank to facilitate faster attach. When, it is used inline on the loads between non-porous to semi-porous, it adds to safety in situations of power failure, by increasing the level of vacuum in the system. This facilitates more time to lower load, safely.
Anver的真空罐可作為內聯或單端口輔助油箱以便更快的連接。當，它被用于在非多孔性之間的負載上的半多孔性，它增加了安全性的情況下，電源故障，通過增加在系統中的真空的水平。這有利于更多的時間來降低負載，安全地。
When, used as auxiliary tank, it uses ing special valve circuits to increase the speed of attachment significantly, after seating of suction cup on the load and activation of the attach mode.
當作為輔助槽時，采用特殊的閥回路，增加了對附件的速度，在吸杯后的負載和激活的附加模式。
ANVER’s large vacuum generators series come with built in reservoirs made up of 11GAend caps and 14GA steel tubing welded to ANSI/AWS D14.1. It has volume of 100 cubic inches or 1639cc. Easy integration into vacuum system is facilitated by the 3/8-NPT ports on both ends. It has a mounting bracket of 3/8″ x 1/2″.
Anver的大型真空發生器系列配備了由11gaend帽和14ga鋼管焊接ANSI/AWS d14.1水庫。它具有100立方英寸或1639cc體積。易于集成到真空系統是由兩端的3 / 8-npt港口便利。它有一個安裝支架為3 / 8“×2 / 1”。
Steel tank / vacuum max. 1.7 l 鋼罐/真空最大1.7升
